How to disassemble Nerf Jolt

Today I thought I would try to mod my Nerf Jolt by removing the air restrictors so the distance would be increased . For the amount of trouble that goes into removing the air restrictors its not really worth doing because the distance didn't vary much at all.

Below is a picture of the working internals, and theres not much to it.

How to disassemble

The first thing you want to do is to remove the trigger pin, to do this just use a small

screw driver to push the holding pin out. If you look at the pin in the picture below it has grooving on it to stop it from coming out. If you use a bit of force it will come out . Just a quick tip, on one side of the trigger housing the pin is flush and the other side is a bit recessed in ,use that side to push. 

Now thats done, undo the four screws at the bottom and then slowly slide the ram out and thats really it.
Now your all done.